In this page you'll learn how you can install Eutelsat@10E. Get the Strong Frequency and other tips and tricks about Eutelsat @10E Satellite making.
After reading this artical you'll be able to install Eutelsat 10E by yourself.Here we'll tell you detailed installation of this Arabic Satellite.
Before starting you should have in mind that to install any satellite you must have following things.
1. AV Supported TV
2. Satellite Receiver
3. KU Band LNB
4. At least 7 feet Dish Antenna
5. 2 Cables(1st will connect your tv to receiver and 2nd will connect receiver to dish)
Connect it correctly.
After this go to New tp(add new tp,add new freq,new tp,frequency adding etc) option in your receiver. Here you'll need to have a Strongest Frequency of Your Targeted Satellite which is Eutelsat at 10 East.
Strongest TP is Given bellow.
11222 V 27500
In the tp adding option you'll se 3 forms 1 of Freq/TP(Frequency) 2 of Pol(polarity) 3 of SR(Symbol rate). In this 11222 is Freq V is pol and 27500 is SR.
Add Strong Frequency correctly.
After this by pressing OK button or saving button you'll see 2 Signals lines 1 will of signals level 2nd will Signals quality. Here is not the value of level only the importance is of Quality which will 0 or 11%. That means it 0.
Now go to your Dish Antenna and Start moving it. Keep in mind that it is located in west side and not so far from earth(Down). Its a little bit to South.
After some hard work at last you'll receive its signals. After Receiving Signals Make an auto scan(Blind scan.automatic search,network scan etc.) and Save all these channels and Enjoy.
Congrats! Its Done. You've Successfully Installed your new Satellite EUTELSAT@10E in your Receiver.
If You liked our tutorial please like and Share it with your friends and please write a few words about it in Comment Box given bellow.
You Might also like Following Links.
Post a Comment